Edge Bevelling Of Multiple Small Parts-Long Plates

 
FF Edge and Bevel Grinding Machines for Seam Preparation Prior to Welding
Bevellers available in 3 Models for specific applications, each can handle upto 60mm thk
All the models have an Oscillating Grinding Unit
Grinding Unit can be tilted to adjust the bevel angle and is positioned on heavy support
Material Removal Rate upto 80 cm³/min depending on the tensile strength of the alloy
Bevel Pro
Bevel angle 0° up to 60°; This unit grinds the pieces from the top side.
Grinding Unit moves along the stationary table 1500/3000mm holding the work pieces.
Bevel Pro
Bevel angle 0° up to 60°; This unit grinds the pieces from the top side.
Grinding Unit moves along the stationary table 1500/3000mm holding the work pieces.
C Frame Throat allows unlimited length of plates to be fed progressively for edge bevelling
Customization
In a modified version the FF 1 is used to grind Holland Profiles in shipyards to manufacture a precise bevel-geometry for the Laser-Hybrid-welding process.
This model is equipped with 2 grinding units creating a bevel including 2 angles in one pass.
To remove primer and other contaminants in the welding area additional grinding units can be added.