Polishing Machine For Micro Finishing

 
Machine with 3 working heads for polishing and micro finishing of hydraulic cylinders before and after chrome plating.
A tailstock is used as a holding system. Set-up for different references is automatic thanks to a software specifically designed by AUTOPULIT to that effect. It is also enables different belt grinding and polishing processes to be programmed. Its high precision work pressure control enables compensation of the differences in geometry, obtaining a very consistent final roughness. The position of the working heads and the tailstock are CN controlled, being able to save up to 999 different programs by means of an interface managable from an operator panel attached to the machine.
Few Typical Applications: