3-Rolls Double Pinch Section Bending Machines (Alpha Series)
 offers Tube Section Bending Machines From   Italy. Machines to bend sections to large diameter arches, rings, coils, spirals. |
|
| In Double Pinch design, both bottom rolls traverse up-down allowing curving of even ends while top roll position is fixed. With all 3 rolls driven, jobs are rolled with minimal scratches. Ideal for bending full circles, rings. Can from smaller diameter rings compared to Pyramid machines |
 |
 |
 |
| AS20 Download Catalog | Alfa 40 Download Catalog | Alfa 50 Download Catalog |
| Angle 2″- Pipe 2″- Flat 2.1/2″ | ||
 |
 |
 |
| Alpha 70 | Alpha 80 | Alpha 100 Download Catalog |
| Angle 2.1/2″-Pipe 2.1/2″-Flat 3″ | Angle 3″- Pipe 3.1/2″- Flat 4″ | |
 |
 |
 |
| Alpha 120 Download Catalog | Alpha 160 Download Catalog | Alpha 200 Download Catalog |
| Angle 4 “- Pipe 5″- Flat 5″ | Angle 5 “- Pipe 6″- Flat 6″ | Angle 10 “- Pipe7.1/2″- Flat 8″ |
 |
 |
| Alpha 300 Download Catalog | Alpha 500 Download Catalog |
| Angle 10 “- Pipe 12″- Flat 10″ | |
| Specification Sheet | |
 |
|